TESCAN NEW PRODUCTS

Posted in News

TESCAN GAIA3 brings together an ultra-high resolution electron column and high-performance ion column fitted onto a single chamber. Built on the proven (MAIA3) FE-SEM platform, GAIA3 extends all of its qualities with the ability to modify surfaces with a focused ion beam. The outstanding imaging capabilities of the GAIA3 begin with its novel FE-SEM with excellent resolution at low voltages. The objective lens is narrower than a conventional objective and InBeam SE and InBeam BSE detectors placed in the column give free space over the sample for unlimited FIB work and various analytical techniques.

Key Benefits‚‚

  • Extraordinary SEM resolution with single-pole 60° objective lens
  • ‚Best-in-class range of display modes – FIELD, RESOLUTION and DEPTH - based on TESCAN´s unique Wide Field Optics
  • ‚‚Superior specimen handling using a motorized compucentric stage
  • ‚‚Field-free mode for observing magnetic samples
  • ‚‚High probe current, up to 200 nA (SEM)
  • ‚‚E-beam lithography with ultra-short dwell time down to 20 ns
  • ‚‚Ultra-high FIB resolution and excellent performance at high current with a Cobra column and probe current 1 pA to 50 nA
  • ‚‚Powerful DrawBeam toolbox including a number of basic and advanced programmable objects with various process parameters
  • ‚‚Besides the ability to investigate and modify the sample surface with enormous analytical potential, an extraordinary number of ports that enables all the detectors and techniques to focus on a common analytical workspace.

General Benefits

The imaging, analysis and control of matter at the nanometer scale are key factors in successfully conducting research today. Resolution, accuracy, reproducibility, robustness and flexibility are key characteristics for a leading-edge tool.

Following three generations of success in electron microscopy, GAIA3 is the next generation platform introduced by TESCAN. Combining unsurpassed nanometer resolution SEM performance with excellent COBRA-FIB capabilities, the new TESCAN GAIA3 offers a wide range of analytical compatibilities.

The greatest benefits of the GAIA3 is its low-voltage SEM imaging while maintaining a high resolution. This is essential especially for examining sensitive or non-conductive samples with a small interaction volume therefore giving excellent resolution and unique low voltage contrast.

COBRA-FIB is a top-level technology in terms of resolution for both imaging and milling. It is the sharpest FIB instrument for nano-engineering in its class.

 

New UHR SEM/i-FIB workstation

Whether your applications demand extremely powerful and ultra-fast micro-/nano- FIB machining, an outstanding image resolution at low beam energies, ultra-fast and reliable microanalysis or 3D analytical reconstructions, XEIA3 stands out as the ideal turnkey solution that offers all these capabilities in one single and unique instrument with ultimate performance.

KEY FEATURES

  • ‚‚ Powerful SEM column equipped with a high brightness Schottky emitter for high currents, low-noise and extraordinary imaging
  • ‚‚ In-Beam detectors for high signaling and excellent imaging at very short working distances
  • ‚‚ Ultra-fast xenon plasma ion source FIB. High beam currents for outstanding milling speeds and an excellent performance in removing large volumes of material, and low beam currents for smooth polishing
  • ‚‚ Ultra-low electron landing energy imaging enabled by the Beam Deceleration Technology (BDT)
  • ‚‚ Less implantation, doping or degradation of insulator deposition a valuable feature for semiconductor industry
  • ‚‚ Simultaneous SEM imaging during FIB milling or deposition (two independent scan generators)
  • ‚‚ Unique and advanced TESCAN’s technologies in terms of automated operations such as the In-Flight Beam TracingTM designed to accurately compute and adjust all the optimal parameters (WD, magnification, etc.) for high resolution imaging
  • ‚‚ Advanced patterning and 3D characterisations capabilities powered by DrawBeam, a pattern editing tool that also provides a real-time visualization during milling or lithographic processes
  • ‚‚ Novel solution for fast 3-dimensional microanalysis such as 3D EDX and EBSD reconstructions
  • ‚‚ Unique integration with TOF-SIMS and scanning probe microscope ‚ 12’’ wafer inspection by means of an extended chamber size for enabling 6’’, 8’’ and 12’’ wafer inspection. 12’’ wafer inspection is an exclusive feature of TESCAN equipment
  • ‚‚ Gas Injection System (GIS) for enhancing your FIB applications
  • ‚‚ High-performance electronics for faster image acquisition up to 20 ns/pxl, excellent deposition rate and an ultra-fast scanning
  • ‚‚ Powerful turbomolecular and dry fore vacuum pump for keeping the chamber clean. Electron gun pumping by ion getter pump

Specific solutions for specific needs

With the launch of XEIA3, TESCAN not only delivers an instrument top of its class but also fulfils its commitment to continue helping researchers to push science and development forward. This is also reflected in the careful customisation of every system in order to meet specific needs. From materials sciences to life sciences or from engineering to semiconductor industry, TESCAN is ready to take up the challenges of the upcoming future. 

Extend the capabilities in all your FIB applications with Xe plasma ion source

The XEIA3 combines the capabilities of an outstandingly fast and powerful xenon plasma ion source with an ultra-high resolution electron column. Such synergy allows for carrying out the most challenging large volume removal applications in beating times which have – up until now – never been achievable before. For research or for high-tech industry the highest precision that only a sub-2 nanometre electron column is guaranteed and opens new possibilities in a wider range of applications. The high current capable plasma ion source allows for a wider range of applications.

 

TESCAN proudly introduces the Q-PHASE, a multimodal holographic microscope (MHM).  With this instrument TESCAN expands into the field of advanced light microscopy. The Q-PHASE is a unique instrument for quantitative phase imaging (QPI) based on patented technology of Coherence-controlled holographic microscopy. This technology uses incoherent light sources (halogen lamp, LED) providing QPI with the highest quality, without any compromises and it is the only QPI technique enabling imaging of samples in scattering media. The Q-PHASE is purposely designed to observe living cells in vitro. It is based on a robust inverted transmission microscope platform. The whole system is situated in a microscope incubator. The full motorization fulfills even the highest demands regarding experiment automation. Furthermore, this system includes multiple imaging modes with fully integrated Fluorescence Module, simulated DIC and brightfield imaging options. All these features make of Q-PHASE a valuable research tool for biological and biotechnical applications such as testing reactions of cells to a specific treatment - even with scattering non-transparent substances, monitoring cell’s life cycle including mitosis, distinguishing between different forms of cell deaths, analyzing cell growth, motility or morphology changes, imaging cells in extracellular matrices.

The Q-PHASE is a unique instrument for quantitative phase imaging (QPI) based on patented technology of Coherence-controlled holographic microscopy. The Q-PHASE is purposely designed to observe living cells in vitro.

Quorum announces new carbon coating capabilities

Posted in News

Quorum announces new carbon coating capabilities

quorum logo


slika plakat1

Quorum has recently enhanced the carbon coating capabilities of it market-leading Q series to give even greater control of evaporation processes.

Controlled pulse carbon cord evaporation

Now installed as standard on Q150T (E and ES) and Q150R (E and ES) models, the new controlled profiles ensure carbon is evaporated in short pulses. This significantly reduces the amount debris (large carbon fragments) associated with traditional carbon "flash" evaporation. Plus it allows carbon cord evaporation to be accurately controlled using the optional film thickness monitor (FTM) accessory.

Click here to see the video

Controlled ramped carbon rod evaporation

This new precise method of control has two important benefits. Careful control of evaporation allows precise control of carbon thickness (with or without the optional film thickness monitor). In addition the quality of the resulting carbon films is enhanced by the eradication of  "sparking" that is a common feature of less advanced coating systems.

Click here to see the video

Online bookmaker the UK whbonus.webs.com William Hill
http://bigtheme.net/wordpress
Сачак/Ламперия Прочети тук